Self-Priming Diesel Engine Horizontal Centrifugal Waste Water Pump

• Customization: Available
• Type: Self-priming Pump With Inner Recirculation
• Air Engine Type: Diesel Engine
• Model NO.: JT-10
• Transmission: Direct Connection Transmission
• Structure: The Slide
• Pump Material: Cast Iron or Stainless Steel
• Impeller Material: Cast Iron or Stainless Steel
• Pump Type: End Suction Centrifugal Pump
• Seal Type: Mechanical Seal
• Engine Type: Water Cooler Engine
• Max. Pass Soild Dia.: 76mm
• Max. Suction Lift: 6.7m
• Pump Accessories: Trailer, Silence-Box, Control Panel, Fuel Tank,etc
• Rotation Speed: 650-1600rpm
• Pump Spare Parts: Pump Casing, Impeller, Seal, Coupling, Bearing,etc
• Transport Package: Standard Plywood Case
• Specification: 10 inch
• Trademark: Y&L
• Origin: Shanghai, China
• HS Code: 8413709990
• Production Capacity: 1000 Sets Per Month

Product Description

Self-priming Diesel Engine Horizontal Centrifugal Waste Water Pump

Feature of self Priming pump
1.Outstanding Self Priming Performance
Ultra strong self priming performance enables this pump to be installed above the liquid level. Long drive shaft, hanging bracket and other devices are not required. What it only requires is to put suction pipe into the sewage. In first use, you only need to fill up the pump chamber with liquid to complete initial self priming. Then, the sewage pump can automatically conduct self priming, thus dramatically reducing installation time and maintenance cost.
2.Nearly Zero Clogging
Semi-open impeller design allows relatively large size solids and super long fiber to pass through the wastewater pump.The maximum diameter of solid particles is up to 3 inch . Even if it is clogged, the manual discharge port installed at the front of the pump can be easily opened to clear up the pump in few minutes.
3.Simple, Quick and Economical Maintenance
If you want to inspect or change impeller, machine seal, wear plate or other accessories, the only think you need to do is to open the front cover and take out the r rotating assembly without having to diamantle the pipeline or pump.


Application
1. Seriously polluted water discharge 
2. Subsurface drainage or mine water drainage
3. Centralized and staged diaposal system of urban sewage disposal plants
4. Severe industrial and commercial sewage treatment
5. Sewage discharge in hospitals, hotel.etc

Technical Parameters  

Model	Rotation Speed	Flow Rate (Q)		Head  (H)	Power (P)		Inlet&outlet size	Max. Solid	Max. Suction Lift
	rpm	m^3/h	I/s	m	KW	HP	mm	mm	m
JT-10	650	250	69	5	11	15	250(10)	76	2.1
	750*	300	83	6.5	15	20			3.4
	850	350	97.0	8.8	22	30			4.3
	950*	400	111	10.3	30	41			5.2
	1050	450	125.0	12.5	45	61			5.5
	1150	500	139	16	55	75			5.5
	1250	525	146	19	75	102			5.8
	1350	550	153.0	23	90	122			6.7
	1450*	600	167	26.5	90	122			6.7
	1600	700	194.5	28	90	122			6.7

 
Performance Curve

 

Structure Picture

Our Service
Delivery: Delivery time will be on time as the contact. Usually, the delivery time is of centrifugal pump is for 15-25 working days.
Warranty: 1 year for the pump body, 3 months for the main working parts.
Package:According to your quantity, we use plywood case which is durable for ocean transport.
Shipping: By Sea and By Air
Payment: We are accept T/T,L/C,West Union and so on.
Pre-sales Service:According to your requirement, we will give your our profession advice of pump solution.
On-sales Service:We will clearly show you everything in fact when you place an order with us. We will takes photos or videos to show you order production situation.
After-sales Service: We will full report you the production progress and plan. Meanwhile, we will follow up the pump working conditions per three months when the pumps put into use, and can send the spare parts to you within one week if you need. 

About Us
Shanghai Y&L Pump Co.,Ltd was found in 2002, which is located in Shanghai. We producing water pumps for more than 10 years, especially self priming pump, diesel engine pump and diaphragm pump. We have an office in Wenzhou which called Wenzhuo Defu Machinery Co.,Ltd.