Stainless Steel Self-Priming Centrifugal CIP Pump

• Customization: Available
• Type: Self-priming Pump With Inner Recirculation
• Air Engine Type: Fitted Motor
• Model NO.: SLRP
• Theory: Centrifugal
• Transmission: Direct Connection Transmission
• Structure: Horizontal
• Pump Type: Self-Priming Pump
• Connection Type: Flange, Clamp, Thread
• Motor Type: Ordinary Fixed Speed, Frequency Adjustable Speed
• Pump Material: AISI304, AISI316L
• Impeller Materia: AISI304, AISI316L
• Pump Installation: Fixed, Movable with Trolley
• Seal Type: Mechanical Seal
• Main Application: Food Fluid, Wine, Water, Mink, etc
• Transport Package: Plywood Case
• Specification: Less 1CBM
• Trademark: Y&L
• Origin: China
• HS Code: 8413810090
• Production Capacity: 50units/Day

Product Description

Introduction
YL stainless steel sanitary grade Self-priming Pump adopts acid-resisting stainless steel (AISI 304, 316) in pump body, which has unique acid and alkali resistance, and comply with sanitary requirements for foods.
As a positive displacement pump, its features are superior to centrifugal pump since it suction liquid mixed with air or foams and even merely air. 
It is widely used to suction material with liquid level below the pump, For instance in the milking room, it suctions milk from the milk barrel. 
It can also be used in automatic CIP cleaning system as return flow pump in cleaning tank. The mechanical sealing is the build-in influx type, and the temperature of suctioned material is no higher than 100ºC.


Main Features
1. The impeller is designed as open type impeller, which deepens the inlet cavity of impeller, enhance the inlet feature of pump and avoid cavitation, with sanitary mirror polishing.
2. The impeller and shaft are designed as taper matching, and the locking nut is provided with seal to prevent the liquid from entering the shaft sleeve and thread, or else, dead comer will be produced.
3. The mechanical seal is so designed that there is no bolt and spring contacting material ,which can be thoroughly cleaned without any pollution.
4. The pump body is provided with drain valve to discharge residua liquid so as to guarantee there is no dead corner.
5. Materials: the liquid passing parts (wetted parts) can be made of SS304 or SS316L. The roughness after fine mirror polishing is Ra<0.4um.
6. The parts and connections that the liquid will pass must be cleaned and there shall have no residuals after cleaning and sterilization, so as to realize the sanitary and aseptic conception in a real sense.
 
Main applications
1. Apply to the transfer of the mediums that are low/middle viscosity, low corrosive & with suspended solid.
2. Mainly used for pharmacy, liquor industry, food industry, chemical industry, drink and other industries.
 
Product details

Working Principle:	Centrifugal
Main applications:	Food fluid, wine, water, mink, etc
Driver:	Electric motor
Max.permissible fluid temperature:	100°C(212°F) / 150°C(302°F) anti-heat seal
Installation position:	Horizontal
Casing/Inner parts material:	Stainless Steel/Stainless steel
Drive rating:	Up to 18.5KW(25HP)
Maximum caliber:	89mm(3.5inch)
Maximum discharge-side pressure:	0.45MPa(4.5bar)
Maximum head:	45m(147.6ft)
Maximum suction lift:	8m(26ft)
Flow rate range:	5-60m3/h(22-264US.GPM)

 
Performance data

Model	Capacity (m3/h)	Head (m)	Inlet		Outlet		Power	Suction lift
			(mm)	(Inch)	(mm)	(Inch)	(KW)	(m)
SLRP-5	5	18	51	2"	51	2 "	1.5	8
SLRP-15	15	28	63	2 1/2"	51	2 "	3	8
SLRP-20	20	28	63	2 1/2"	51	2 "	4	8
SLRP-25	25	28	63	2 1/2"	63	2 1/2"	5.5	8
SLRP-30	30	28	63	2 1/2"	63	2 1/2"	7.5	8
SLRP-40	40	40	76	3"	76	3"	11	8
SLRP-50	50	45	89	3 1/2"	89	3 1/2"	15	8
SLRP-60	60	45	89	3 1/2"	89	3 1/2"	18.5	8

Motor specification
Voltage:          110~240V single phase (0.75~1.5KW), 220~440V 3phase 
Frequency:     50Hz or 60Hz
Type:              Ordinary fixed speed, Frequency adjustable speed, Explosion proof
Brand: China high quality brand, Shanghai ABB, Siemens, Beide, ABB, etc

Pictures

Excellent pumps are fabricated by high-precision equipments and carefully selected high-quality materials.





For your high viscosity liquid products transfer, pls refer to our rotary lobe pumps.

Photo for rotary lobe pumps.


Technical parameters for rotary lobe pumps

Model	Displace-ment (L/r)	Speed range (r/min)	Capacity range (M³/h)	Max. Pressure (Mpa)	Power (Kw)	Suction pressure (Mpa)	Inlet &outlet (mm)	Max. Viscosity (cp)
25BV12-2	0.15	20-600	0.09-4.32	1.2	2.2	-0.02~-0.08	25	1000000
40BV12-5	0.32	20-550	0.18-7.92	1.2	4	-0.02~-0.08	40	1000000
50BV12-8	0.47	20-550	0.28-12.4	1.2	5.5	-0.02~-0.08	50	1000000
50BV12-10	0.65	20-550	0.39-17.16	1.2	7.5	-0.02~-0.08	50	1000000
65BV12-20	1.74	20-550	1.04-45.94	1.2	15	-0.02~-0.08	65	1000000
80BV12-30	2.5	20-550	1.5-66.00	1.2	22	-0.02~-0.08	80	1000000
80BV12-40	3.65	20-550	2.19-96.00	1.2	30	-0.02~-0.08	80	1000000
125BV12-50	4.6	20-420	2.76-92.74	1.2	37	-0.02~-0.08	125	1000000
125BV12-70	6.1	20-420	3.66-122.98	1.2	45	-0.02~-0.08	125	1000000
125BV12-80	7.0	20-420	4.20-141.12	1.2	55	-0.02~-0.08	125	1000000
150BV12-100	11.4	20-420	6.84-229.82	1.2	75	-0.02~-0.08	150	1000000
150BV12-150	12.5	20-420	7.50-252.00	1.2	90	-0.02~-0.08	150	1000000
175BV12-200	16.7	20-420	10.02-336.67	1.2	110	-0.02~-0.08	175	1000000

Note*

1. Tested medium: water. Your liquid's density, viscosity and temperature are necessary to supply when choose the pump.

2. Speed, flow rate, electrical power and pressure will be varified according to different liquid properties.

3. Port size can be changed as needed.

4. YL reserves the right to change specifications without prior notification.

Contact us