| Customization: | Available |
|---|---|
| Screw Number: | Totary Lobe Pump |
| Screw Suction Method: | Single Suction |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Brief introduction
As a recognised market leader in soap pumping, YL has been supplying its rotary lobe pumps to numerous processes for over 15 years. YL Committed to offer high quality pumps to our clients with affordable price. The pumps we made not only durable but efficient, can definitely save a lot of your time and cost. We select the pump according to your characteristics of medium and condition of the technological requirements, bring you the best pump for your critical process.
Pump Applications
Consumer chemicals: AES, LAS, AOS, K12, glycerol, fatty alcohol, bathing shampoo, skin cream, shampoo, detergent liquid, toothpaste soap, washing powder slurry, etc.
Why Yl pump for your soap
--Handling from low to high viscosity pumped media, the pumps characteristic smooth, reliable, low shear pumping action and gentle handling of shear sensitive media, provides for long trouble-free service.
--Low running and maintenance costs with easy access to the pumphead minimising downtime, results in a reduced lifecycle cost.
--Non-contacting pumphead design ensures that abrasive particles do not cause excessive wear.
--Indefinite dry running capability avoids pump components shedding into the pumped media.
--Compact pump unit design requires considerably less floor space than other pump technologies.
Pump Working principle
The even rotation of the rotor pair creates a vacuum on the priming side of the pump, which can be defined by the direction of rotation of the drive. This vacuum draws the liquid into the pump chamber. With further rotation, the pumped medium is conveyed past the pump wall into the pressure area. Up to six chamber charges are displaced with each drive rotation depending on the rotor type. When the rotor is at a standstill, the pump seals off almost completely.
Pump Structure
Complete pump consists of bare shaft pump, coupling& shield, gear reduer with motor and baseplate. You can only have our bare shaft pump.
Pump Specifications
|
Model |
Displace-ment (L/r) |
Speed range (r/min) |
Capacity |
Max. (Mpa) |
Power (Kw) |
Suction pressure (Mpa) |
Inlet &outlet (mm) |
Max. (cp) |
|
25BV12-2 |
0.15 |
20-600 |
0.09-4.32 |
1.2 |
2.2 |
-0.02~-0.08 |
25 |
1000000 |
|
40BV12-5 |
0.32 |
20-550 |
0.18-7.92 |
1.2 |
4 |
-0.02~-0.08 |
40 |
1000000 |
|
50BV12-8 |
0.47 |
20-550 |
0.28-12.4 |
1.2 |
5.5 |
-0.02~-0.08 |
50 |
1000000 |
|
50BV12-10 |
0.65 |
20-550 |
0.39-17.16 |
1.2 |
7.5 |
-0.02~-0.08 |
50 |
1000000 |
|
65BV12-20 |
1.74 |
20-550 |
1.04-45.94 |
1.2 |
15 |
-0.02~-0.08 |
65 |
1000000 |
|
80BV12-30 |
2.5 |
20-550 |
1.5-66.00 |
1.2 |
22 |
-0.02~-0.08 |
80 |
1000000 |
|
80BV12-40 |
3.65 |
20-550 |
2.19-96.00 |
1.2 |
30 |
-0.02~-0.08 |
80 |
1000000 |
|
125BV12-50 |
4.6 |
20-420 |
2.76-92.74 |
1.2 |
37 |
-0.02~-0.08 |
125 |
1000000 |
|
125BV12-70 |
6.1 |
20-420 |
3.66-122.98 |
1.2 |
45 |
-0.02~-0.08 |
125 |
1000000 |
|
125BV12-80 |
7.0 |
20-420 |
4.20-141.12 |
1.2 |
55 |
-0.02~-0.08 |
125 |
1000000 |
|
150BV12-100 |
11.4 |
20-420 |
6.84-229.82 |
1.2 |
75 |
-0.02~-0.08 |
150 |
1000000 |
|
150BV12-150 |
12.5 |
20-420 |
7.50-252.00 |
1.2 |
90 |
-0.02~-0.08 |
150 |
1000000 |
|
175BV12-200 |
16.7 |
20-420 |
10.02-336.67 |
1.2 |
110 |
-0.02~-0.08 |
175 |
1000000 |
Note*
1. Tested medium: water. Your liquid's density, viscosity and temperature are necessary to supply when choose the pump.2. Speed, flow rate, electrical power and pressure will be varified according to different liquid properties.
3. Port size can be changed as needed.
4. YL reserves the right to change specifications without prior notification.
Pump Applications
Consumer chemicals: AES, LAS, AOS, K12, glycerol, fatty alcohol, bathing shampoo, skin cream, shampoo, detergent liquid, toothpaste soap, washing powder slurry, etc.
How to choose our pump
Dear Customer,
To ensure satisfactory performance of required pumps, it is important that the pump must be properly selected. Below table is for your selection guideline, which is nessary to supply us for a targeted solution and offer.
| Selection Guideline | |||
| Buyer information | |||
| Company name | Contact person | ||
| Website | |||
| Address | Mobile No. | ||
| Tel/Fax No. | Online chat ID. | ||
| Liquid information | |||
| Your industry: __________ Liquid name:___________ | |||
| Features: Sanitary[ ] Corrosive[ ] Poisonous[ ] | |||
| Viscosity:_______cp Density:_______ Temperature:_____ºC PH value:________ | |||
| Solid content:_______ Max. size of particle:_______ | |||
| Using condition | |||
| Capacity: Max. required:__________ L/H Working required:__________ L/H | |||
| Discharge pressure: Max. required:__________Mpa Working required:__________ Mpa | |||
| Suction pressure: Max. required:__________Mpa Working required:____________ Mpa | |||
| Delivery head required:____________ Vacuum:________ Mpa | |||
| Heating jacket required: Yes[ ] No.[ ] Heating temp.:_____ºC | |||
| Liquid inlet/outlet direction: Horizontal[ ] vertical[ ] | |||
| Pipe size: Inlet___________ Outlet____________ | |||
| Connection type required: Flange[ ] Thread[ ] Clamp[ ] | |||
| Installation type: Fixed [ ] Movable[ ] | |||
| Operating status: Continuous[ ] Interruption[ ] | |||
| Liquid contact material: SS304[ ] 316[ ] 316L[ ] Others________ | |||
| Special request_____________________________________ | |||
){kind=link}