Retention Agent Delivery Pumps for Paper Industry

• Screw Number: Rotary Lobe Pump
• Screw Suction Method: Single Suction
• Pump Shaft Position: Horizontal
• Performance: Corrosion
• Application: Chemical
• Certification: CE, ISO
• Model NO.: BV
• Contact Material: SS304, SS316, SS316L
• Connection Type: Flange, Clamp, Thread
• Driving Type: Fixed Speed Driving, Variable Speed Driving
• Lobe Type: Tri-Lobe, Bi-Lobe, Single Lobe and Multi-Lobe
• Transport Package: Plywood Case
• Origin: China
• HS Code: 8413603190
• Production Capacity: 2000units Per Year

Product Description

Brief introduction

As a recognised market leader in Retention agent/aid pumping, YL has been supplying its rotary lobe pumps to numerous processes for over 15 years. YL Committed to offer high quality pumps to our clients with affordable price. The pumps we made not only durable but efficient, can definitely save a lot of your time and cost. We select the pump according to your characteristics of medium and condition of the technological requirements, bring you the best pump for your critical process.

Why our pump for your Retention agent/aid
--All the contact parts are made of stainless steel, no wearing part.
--Non-contacted pump head design, ability to pump abrasive media.
--No friction, long life.
--Low shear pumping, ability to pump sensitive media, such as latex and starch based coatings.
--Simple assembling and disassembling, easy to maintenance with few special tools, small space and human.
--High efficiency and energy-saving, low failure rate, reliable sealing and low noise.
--Dry running is allowed with our special designed mechanical seal.
--Improve your productivity and reduce cost.

Case
Retention Aid is the key to cost savings in paper mill. Retention aids are used wet end of the paper mill to improve retention of fine particles, fillers, additives & sizing agent during the formation of paper.  A customer from the paper industry was looking for a pump with dry-run capability to transfer liquid bulking agent. The system also had to be very easy to maintain - that's why a YL Rotary Lobe Pump with no wearing parts quickly came up as the ideal solution. The result: high reliability and lower operating costs.


Pump Specifications

Model	Displace-ment (L/r)	Speed range (r/min)	Capacity range (M³/h)	Max. Pressure (Mpa)	Power (Kw)	Suction pressure (Mpa)	Inlet &outlet (mm)	Max. Viscosity (cp)
25BV12-2	0.15	20-600	0.09-4.32	1.2	2.2	-0.02~-0.08	25	1000000
40BV12-5	0.32	20-550	0.18-7.92	1.2	4	-0.02~-0.08	40	1000000
50BV12-8	0.47	20-550	0.28-12.4	1.2	5.5	-0.02~-0.08	50	1000000
50BV12-10	0.65	20-550	0.39-17.16	1.2	7.5	-0.02~-0.08	50	1000000
65BV12-20	1.74	20-550	1.04-45.94	1.2	15	-0.02~-0.08	65	1000000
80BV12-30	2.5	20-550	1.5-66.00	1.2	22	-0.02~-0.08	80	1000000
80BV12-40	3.65	20-550	2.19-96.00	1.2	30	-0.02~-0.08	80	1000000
125BV12-50	4.6	20-420	2.76-92.74	1.2	37	-0.02~-0.08	125	1000000
125BV12-70	6.1	20-420	3.66-122.98	1.2	45	-0.02~-0.08	125	1000000
125BV12-80	7.0	20-420	4.20-141.12	1.2	55	-0.02~-0.08	125	1000000
150BV12-100	11.4	20-420	6.84-229.82	1.2	75	-0.02~-0.08	150	1000000
150BV12-150	12.5	20-420	7.50-252.00	1.2	90	-0.02~-0.08	150	1000000
175BV12-200	16.7	20-420	10.02-336.67	1.2	110	-0.02~-0.08	175	1000000

Note*

1. Tested medium: water. Your liquid's density, viscosity and temperature are necessary to supply when choose the pump.

2. Speed, flow rate, electrical power and pressure will be varified according to different liquid properties.

3. Port size can be changed as needed.

4. YL reserves the right to change specifications without prior notification.

How to choose our pump
Dear Customer,
To ensure satisfactory performance of required pumps, it is important that the pump must be properly selected. Below table is for your selection guideline, which is nessary to supply us for a targeted solution and offer. 

Selection Guideline
Buyer information
Company name		Contact person
Website		Email
Address		Mobile No.
Tel/Fax No.		Online chat ID.
Liquid information
Your industry: __________ Liquid name:___________
Features:  Sanitary[  ]   Corrosive[  ]  Poisonous[  ]
Viscosity:_______cp Density:_______ Temperature:_____ºC PH value:________
Solid content:_______    Max. size of particle:_______
Using condition
Capacity:  Max. required:__________ L/H     Working required:__________ L/H
Discharge pressure: Max. required:__________Mpa    Working required:__________ Mpa
Suction pressure: Max. required:__________Mpa    Working required:____________ Mpa
Delivery head required:____________  Vacuum:________ Mpa
Heating jacket required: Yes[    ] No.[     ]           Heating temp.:_____ºC
Liquid inlet/outlet direction: Horizontal[     ]   vertical[      ]
Pipe size: Inlet___________ Outlet____________
Connection type required: Flange[     ] Thread[     ] Clamp[     ]
Installation type: Fixed [     ] Movable[     ]
Operating status: Continuous[     ]  Interruption[     ]
Liquid contact material: SS304[     ] 316[     ] 316L[     ]         Others________
Special request_____________________________________

Factory workshop showing